Subsoiler

1S Series Subsoiler – Full Product Description

The 1S Series Subsoiler is heavy-duty subsoiling equipment developed for large-scale overseas big farms. It covers all mainstream specifications from 2 tines to 5 tines, perfectly compatible with high-horsepower tractors in corresponding power range. Adopting non-vibration rigid subsoiling tine structure, it can directly penetrate 550mm deep underground during operation, completely break the hard plow pan formed by years of tillage, without disturbing the upper and lower layered structure of the plow layer soil, serving as the core soil preparation implement to realize conservation tillage and improve farmland fertility.

1. 550mm Maximum Subsoiling Depth Completely Breaks The Plow Pan
   The maximum working depth can reach 550mm, far exceeding the working depth of ordinary soil preparation implements. It can directly break the hard plow pan formed by years of plowing, restore the deep soil to loose state, the soil air permeability and water permeability are directly improved several times. After rainfall, rainwater can quickly penetrate into deep soil, which drastically improves the drought resistance and waterlogging prevention capacity of farmland.
2. Subsoiling Without Turning Soil Fully Preserves Original Plow Layer Structure
   During the subsoiling operation, it only longitudinally stretches and loosens the deep soil, will not turn deep raw soil to the surface, and will not disturb the layered structure of topsoil. It will not turn surface weeds and insect eggs to deep layer, nor will it turn up deep raw soil to affect the growth of current season crops, which fully meets the agronomic requirements of conservation tillage.
3. Full Rigid Thickened Frame Never Deforms Under Years of Heavy Load Operation
   The whole machine is made of thickened high-strength square tubes welded into an integrated rigid frame, there are no fragile spliced components. Even under long-term deep heavy load operation on stony hard plots, the machine frame will never deform or have welding crack problems, the overall design service life is far longer than ordinary light-duty subsoilers.
4. Wear-Resistant and Corrosion-Resistant Key Components Adapt to Complex Overseas Working Conditions
   Core friction components such as subsoiler shovel tip and cutting edge are all made of high-carbon steel with quenching and wear-resistant treatment, the surface is coated with special anti-corrosion layer. Even under years of operation on harsh working conditions such as saline-alkali land and gravel land, the component wear rate is extremely low, which maximizes the operation reliability on complex plots in different overseas regions.

Typical Applications: Conservation tillage subsoiling operations on large-scale big farms, deep soil preparation operations before planting root and tuber crops such as potatoes, water storage and moisture retention subsoiling operations on farmland in arid regions, deep breaking operations on plots with severe compaction after years of continuous cropping, and deep soil loosening improvement operations on saline-alkali land.